1. Create a user with your phone number, and log in using the password you receive through SMS.
2. To use a chargepoint that requires payment, you have to register a credit card.

After completing these steps you can use any chargepoint connected to EV Cloud.

You can start charging in three ways: directly from the home page, through and RFID card, and through SMS.

To start from the home page:

1. Find the chargepoint you are standing next to. You can search the name which is marked on the charge point, through the address, or by finding on the map.

2. Once you have found the chargepoint, just press "start charging".

3. Connect the vehicle with the correct cable and charging will start right away. You stop charging by simply disconnecting your vehicle.

After you are registered, you can simply start charging by sending an SMS.

1. Send the name of the chargepoint (for example evcloud3) to number +46 (0)769-436600.
2. Connect the vehicle with a charging cable.

Charging stops when you disconnect the vehicle.

Please note! You still have to register a credit card to use chargepoints that require payment.

With an RFID card, you can start charging by simply placing the card against the RFID reader on the drive. You can use any RFID card, and you probably have one before, such as a keychain or a recent visa card.

Here's how to connect the RFID card / chip to charge through your EV Cloud account :.

Stand next to a charging station.

In the Add RFID page, enter the name of the charging station that is marked next to the socket, and press "Add RFID"

Hold the card against the RFID reader on the drive, and wait for the green signal on the web page.

NB You must still register a debit card to use charging stations that require payment.